Report item
Item specifics
  • is_customized: YES
  • Power: Low Power
  • Name: Waveshare
  • Frequency: Low Frequency
  • Model Number: OpenEP4CE10-C Standard
  • Category: ALTERA FPGA Development Board
  • For use with: EP4CE10 Development & Evaluation
  • Onboard FPGA: EP4CE10F17C8N (ALTERA Cyclone IV)
  • Feature: Open & Modular design, features various communication interfaces
  • Onboard devices: 1 x EPCS16SI8N, 4 x LED, 1 x User key, 1 x Joystick, 1 x Buzzer
Product Description
Communation interfaces:3 x LCD, 2 x 8I/Os, 2 x 16I/Os, 3 x 32I/Os
Place of Origin:Guangdong, China (Mainland)

FPGA development board designed for ALTERA Cyclone IV series, features the EP4CE10 onboard, and integrates various standard interfaces, pretty easy for peripheral expansions.

Overview

OpenEP4CE10-C is an FPGA development board that consists of the mother board DVK600 and the FPGA core board CoreEP4CE10.

OpenEP4CE10-C supports further expansion with various optional accessory boards for specif applation. The modular and open design makes it the ideal for starting applation development with ALTERA Cyclone IV series FPGA deves. OpenEP4CE10-C enables you to start your design with the Nios II processor easily and qukly.

What\'s on the mother board

  1. FPGA CPLD core board connector: for easily connecting core boards whh integrate an FPGA CPLD chip onboard
  2. 8I/Os_1 interface, for connecting accessory boards/modules
  3. 8I/Os_2 interface, for connecting accessory boards/modules
  4. 16I/Os_1 interface, for connecting accessory boards/modules
  5. 16I/Os_2 interface, for connecting accessory boards/modules
  6. 32I/Os_1 interface, for connecting accessory boards/modules
  7. 32I/Os_2 interface, for connecting accessory boards/modules
  8. 32I/Os_3 interface, for connecting accessory boards/modules

All the I/O interfaces above:

  • capable of being simulated as USART, I2C, SPI, PS/2, etc.
  • capable of driving deves such as FRAM, FLASH, USB, Ethernet, etc.
9. SDRAM interface
  • for connecting SDRAM accessory board
  • also works as FPGA CPLD pins expansion connectors
10. LCD interface, for connecting LCD22, LCD12864, LCD1602
11. ONE-WIRE interface: easily connects to ONE-WIRE deves (TO-92 package), such as temperature sensor (DS18B20), electron registration number (DS2401), etc.
12. 5V DC jack
13. Joystk: five positions
14. Buzzer
15. Potentiometer: for LCD22 backlight adjustment, or LCD12864, LCD1602 contrast adjustment
16. Power switch
17. Buzzer jumper
18. ONE-WIRE jumper
19. Joystk jumper

For jumpers 17-19:

  • short the jumper to connect to I/Os used in example code
  • open the jumper to connect to other custom pins via jumper wires

The DVK600 supports a wide range of different core boards, therefore, some of the interfaces may be Not-Connected and useless while connecting to certain core board.

What\'s on the CoreEP4CE10

  1. EP4CE10F17C8N: the ALTERA Cyclone IV FPGA deve whh features:
    • Operating Frequency: 50MHz
    • Operating Voltage: 1.15V~3.465V
    • Package: BGA256
    • I/Os: 164
    • LEs: 10K
    • RAM: 414kb
    • PLLs: 2
    • Debugging/Programming: supports JTAG
  2. AMS1117-3.3 (on bottom side), 3.3V voltage regulator
  3. AMS1117-2.5 (on bottom side), 2.5V voltage regulator
  4. AMS1117-1.2 (on bottom side), 1.2V voltage regulator
  5. EPCS16, onboard serial FLASH memory, for storing code
  6. Power indator
  7. LEDs
  8. Reset button
  9. nCONFIG button: for re-configuring the FPGA chip, the equivalent of power reseting
  10. 50M active crystal
  11. JTAG interface: for debugging/programming
  12. FPGA pins expander, VCC, GND and all the I/O ports are accessible on expansion connectors for further expansion

Related Products

Photos

Note: The OpenEP4CE10-C does NOT integrate any programming/debugging function, a programmer/debugger is required.

Examples

The OpenEP4CE10-C FPGA development board comes with various examples codes for the supported peripherals, whh give you a quk start to develop your own applation.

Debugging/Programming Interface

The OpenEP4CE10-C FPGA development board integrates JTAG interface for programming/debugging.

JTAG Signal Names & Description

JTAG Header Pinout

Development Resources

The User Guide CD includes development resources listed as follow:

  • Related Software (Quaters II, NIOS II etc.)
  • Demo Code (Verilog, VHDL and NIOS II C)
  • Schemat (PDF)
  • FPGA Development Documentations (Datasheets etc.)

Package Contains

Standard Package

  1. OpenEP4CE10-C development board x 1
  2. 4-pin wire x 2
  3. 2-pin wire x 2
  4. USB power cable x 1
  5. User guide CD x 1

For large quantity please feel free to contact us for quotation!

Packaging Details
  • Unit Type: piece
  • Package Weight: 0.2kg (0.44lb.)
  • Package Size: 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in)
Shipping
Calculate your shipping cost by country/region and quantity.
Quantity: Ship to:
Packaging Details
  • Unit Type: piece
  • Package Weight: 0.2kg (0.44lb.)
  • Package Size: 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in)
Payment
We support the following payment methods. All payments made on AliExpress are processed by Alipay.